Remote control Festool CT-F I/M-Set Bluetooth remote control Retrofitting kit for CT 26, 36 and 48  AREAS OF USE Module for installation in the free module slot on the vacuum cleaner.Remote control via the remote control (included in the set) or via the cordless machine (in combination with a Bluetooth battery), which allows the vacuum cleaner to start automatically when the cordless machine is started.The remote control also makes it possible to start the vacuum cleaner directly from the suction hose even when the vacuum cleaner is in AUTO mode.FEATURESIncluded in delivery: Remote control CT-F I and receiver module (for CT 26, 36 and 48) SPECIFICATIONSBrand name FESTOOL

Read more less

Festool cordless drill TDC 18/4 5.0/4.0-Plus In remote warehouse - Usually delivered within 8 days AREAS OF USE Installation of doors and windowsDrilling and screwdriving in wood, metal and plasticScrewdriving in wood up to 10x300 mmDrilling up to 70 mm in wood with Forstner bitsCHARACTERISTICSPowerful. Flexible. With 4 gears for every task. With the best gear shifting concept ever. Just as good in wood as in metal: TDC handles tough jobs and is extremely robust and durable with its brushless EC-TEC motor. The numerous and perfectly matched accessories make the QUADRIVE an unrivalled drill/screwdriver for a wide range of applications. What about the dangerous twisting motion of the wrist if the tool suddenly jams? Our clever Kickback stop minimises the risk of this happening. Try it: the best drill/screwdriver Festool has ever made!From strong to fast. With its 4 gears, the power is in the lower gears and the speed is in the higher gears.Maximum power: with the powerful, brushless and therefore durable EC-TEC motorRobust: wear-resistant four-speed metal gearbox4 gears for all working situations: from screwdriving with 50 Nm torque in 1st gear to precision drilling with 3600 rpm in 4th gearVersatile: with the FastFix system you can quickly and tool-free switch between drilling, screwdriving, angle drilling and angle screwdrivingWith the depth stop and eccentric chuck you can also screw with precise depth control and close to the edgeFlexible battery system: when high power is required, the 4.0 Ah Li-High Power battery is used, an ideal combination of power, compact format and lightness. If even more power is required, the 5.0 Ah battery is the right choice for heavy drilling and screwdriving work. Fully covered: Needless to say, Motek's Festool warranty also applies to the batteries.Supplied in SYS3 M 187 with Battery BP 18 Li 4.0 HPC-ASI, Battery BP 18 Li 5.0 ASI, Charger TCL 6, CENTROTEC chuck, CENTROTEC bit holder BH 60 CE-imp, FastFix quick chuck KC 13-1/2-MMFP, Bits PZ 2 and extra side handleSPECIFICATIONSBrand name FESTOOLBattery capacity (Ah)4.0/5.0Low battery level indicationDrill chuck type Quick-changeDrill chuck clamping range (mm)1.5-13Drilling capacity wood (mm)70Torque setting 1st gear (Nm)2-20Torque setting 2nd gear (Nm)2-20Max. torque hard material (Nm)75Max. torque soft material (Nm)50Drilling capacity steel (mm)13Batteries (pcs.)2Battery type Li-IonVoltage (V)18Sound power level LwA (dB)84Sound pressure level LpA (dB)73Vibration value 3-axis, ah (m/s²)2.5Number of gears4Brushless motorEnergy source BatteryLED lightNo load speed (rpm)0-3600No load speed 1st gear (rpm)500No load speed 2nd gear (rpm)800No load speed 3rd gear (rpm)2350No load speed 4th gear (rpm)3600Weight with battery (kg)1.9Weight without battery (kg)1.4Dimensions - LxWxH (mm)167x74x199

Read more less

Fuji Spray 5137 Air Cap Kit Carrying Case Keep your air caps neatly in one place. This air cap kit carrying case can hold 4 sets of needles, nozzles and air caps. The T-Series (Part 5100) and M-Series (Part 7020) will fit in this case. Please note that the GXPC Series (Part 8050) is not compatible with this case.

Read more less

Festool KAPEX KS 120 REB Crosscut/Miter Saw AREAS OF USE Cutting and mitring wood, plastic and aluminumCutting wood up to 305 x 88 mmAdjusting hollow wedge strips up to 168 mm in the "original wall position" CHARACTERISTICSDouble line laser that shows the exact width of the saw cut.Extendable table - for better support of longer workpiecesAdjustable angle for easy transfer of angles to the fence.Simple and precise fine adjustment of the inclination angle.Double column guide with double ball bearings for outstanding precisionIntegrated special position for cutting depth up to max. 120 mmAdjustable speed, soft start, quick brake and overload protection.Supplied with: saw blade HM 260x2.5x30 W60, angle SM-KS, clamp KL-KS 120 and operating tools. SPECIFICATIONSBrand name FESTOOLTable height, saw mounted on stand (mm)900Miter angle right (degrees)60Miter angle left (degrees)50Tilt angle right (degrees)47Tilt angle left (degrees)47Hole guide diagonal cut 45°/90° (mm)168Cutting capacity 45°/45° right (mm)215x35Cutting capacity 45°/90° (mm)215x88Cutting capacity 45°/45° left (mm)215x55Cutting capacity 90°/90° (mm)305x88Cutting capacity special 45°/90° right (mm)20x120Cutting capacity special 45°/90° left (mm)40x120 Power (W)1600Voltage (V)230Sound power uncertainty KwA (dB)3Sound power level LwA (dB)100Sound pressure level LpA (dB)88Energy source. ElectricityNo-load speed (rpm)1400-3400Dust extraction connection Ø (mm)27Stepless speed controlWeight (kg)23.2Dimensions - LxWxH (mm)709x504x488

Read more less

FESTOOL Vacuum cleaner Festool CTLC MIDI I AREAS OF USE For hazardous wood dust and mineral dust - dust class M with limit values ​​> 0.1 mg/m³Very well suited for hazardous wood dust and suitable for quartz-containing mineral dustPoint extraction on machinesWet and dry vacuumingCHARACTERISTICS Low weight, practical size and a number of smart details - the new compact CTM MIDI I vacuum cleaner stands out on many levels.With intuitive touch control, smooth suction hose and flat storage surface for tools and work materials.Manual cleaning and main filter that can be changed from the outside for long-term, health-friendly work.With integrated Bluetooth® technology, the vacuum cleaner is started automatically via the Bluetooth® battery or with a remote control.Integrated hose storage, SYSTAINER T-LOC connector and a practical cable winder.Certified for dust class MAll this provides clean air in the workplace, easily and comfortably, wherever you work.Supplied with Suction hose Ø 27/32 x 3.5 m-AS/CT, Bluetooth® function and filter bagSPECIFICATIONSBrand FESTOOLContainer capacity max. (l)15Filter surface (cm2)3369Filter bag capacity max. (l)12.5Air flow max. (l/min)3700Machine socket, max. load (W)2200Vacuum pressure max. (mbar)240Dry vacuumingVacuum max. (Pa)24000Water suctionDust class MPower (W)1200Power cable length (m)7.5Voltage (V)230Sound pressure uncertainty KpA (dB)3Sound pressure level LpA (dB)70Energy source ElectricityDust extraction connection Ø (mm)58Stepless speed controlWeight (kg)11.3Dimensions - LxWxH (mm)470x320x495

Read more less

FESTOOL Vacuum cleaner Festool CTL MINI I AREAS OF USE For dust with TWA values ​​> 1 mg/m³Point extraction on machinesWet and dry vacuuming CHARACTERISTICS Low weight, practical size and a number of smart details - the new compact CTL MINI I vacuum cleaner stands out on many levels.With intuitive touch control, smooth suction hose and flat storage surface for tools and work materials.Manual cleaning and main filter that can be changed from the outside for long-term, health-friendly work. With integrated Bluetooth® technology, the vacuum cleaner is started automatically via the Bluetooth® battery or with a remote control.Integrated hose storage, SYSTAINER T-LOC connection and a practical cable winder.Certified for dust class LAll this provides clean air in the workplace, easily and comfortably, wherever you work.Supplied with Suction hose Ø 27/32 x 3.5 m-AS/CT, Bluetooth® function and filter bag SPECIFICATIONSBrand name FESTOOLContainer capacity max. (l)10Filter surface (cm2)3369Filter bag capacity max. (l)7.5Air flow max. (l/min)3700Machine socket, max. load (W)2200Vacuum pressure max. (mbar)240Dry vacuumingVacuum max. (Pa)24000Water suctionDust class LPower (W)1200Power cable length (m)7.5Voltage (V)230Sound pressure uncertainty KpA (dB)3Sound pressure level LpA (dB)70Energy source ElectricityDust extraction connection Ø (mm)58Stepless speed controlWeight (kg)11Dimensions - LxWxH (mm)470x320x455

Read more less

FESTOOL Multicutter VECTURO OSC 18 Li E-Basic AREAS OF USE Cut-outs, recesses and plunge cuts in wood, coated wood, varnished wood, laminate, fiberglas reinforced plastic, plasterboard, non-ferrous metals and plastic materialsCutting mouldings, beams, profiles of all types, door jambs and pipesRemoval of adhesives, old varnish, adhesive residues, silicone, carpets etc.Suitable for cutting marble joints, epoxy resin compounds, concrete joints, hard epoxy and cement joints FEATURESSaves time: The quick-change system with Starlock Max tool holder enables quick tool changes without the need for additional equipmentFast: Brushless EC-TEC motor with speed control for maximum working speedCarefully designed: Additional system accessories enable precisely controlled plunge cuts and sawing with minimal dust generation - even when working overheadComfortable: Noise and vibration damping for optimal comfort while working. The anti-vibration system ensures that the housing and motor are completely isolatedMobile: Complete cordless mobility thanks to the 18 V lithium-ion batterySupplied in SYS3 M 187 with and Saw blade USB 78/32/Bi/OSC. Without battery and charger SPECIFICATIONSBrand name FESTOOL Oscillation frequency (per min)19500 range (degrees)2Batteries (pcs)0Battery type Li-IonVoltage (V)18Battery level status displayesSound power level LwA (dB)94Sound pressure uncertainty KpA (dB)3Sound pressure level LpA (dB)83Vibration uncertainty K (m/s²)1.5Vibration value 3-axial, ah (m/s²)7Brushless motorEnergy source BatteryStepless speed controlWeight without battery (kg)1.1Dimensions - LxWxH (mm)314x82x117

Read more less

Festool PSC 420 Li EB-Basic AREAS OF USE Cut-out for sinks and stove topsJig sawing in wood, steel, metal and plastic CHARACTERISTICSBrushless motor - high performance and long service lifeQuick change of base plates and saw blades without the use of toolsThree-way saw blade control and a stable lever provide excellent resultsFlexible - can use all Festool BPS and BPC batteriesSupplied in Systainer SYS3 M 187 Standard base plate LAS-PS 400 and Surface protector (without battery and charger) SPECIFICATIONSBrand name FESTOOLCutting capacity in non-ferrous metals (mm)20Cutting capacity in steel (mm)10Cutting capacity in wood (mm)120Pendulum movementesSaw blade movement (mm)26 Batteries (pcs)0Battery typeLi-IonVoltage (V)18Sound power level LwA (dB)99Sound pressure level LpA (dB)88Vibration value 3-axis, ah (m/s²)12Brushless motorEnergy sourceBatteryFestool SERVICE LED lightDust extraction connection Ø (mm)27Stepless speed controlWeight without battery (kg)1.7Dimensions - LxWxH (mm)306x81x178

Read more less

AREAS OF USE Cutting and splitting up to 55 mm material thicknessIdeal for mobile use on the construction siteTogether with a Bluetooth®-compatible Festool dust extractor, Festool Bluetooth® batteries enable the dust extractor to start automatically when the saw is started CHARACTERISTICSMobility and independence thanks to the powerful 18 V Lithium-ion battery and the option of connecting a cutting railBrushless EC-TEC motor in combination with Li-Ion battery for maximum powerIn combination with cutting rail: cuts quickly, perpendicularly and mobileSafe and comfortable handling - depth adjustment with lowering function, remote-controlled blade guard and riving knife.Delivered in SYS3 M 337 with 2 batteries BP 18 Li 5.0 ASI, Quick charger SCA 16, HM saw blade W18 and operating tools. SPECIFICATIONSBrand nameFESTOOLBattery capacity (Ah)5.0Cutting capacity max (mm)55Blade diameter (mm)160Blade spindle Ø (mm)20Cutting capacity 45° (mm)42Angle range (degrees)0 - 50Batteries (pcs)2Battery typeLi-IonVoltage (V)18Sound power level LwA (dB)90Sound pressure level LpA (dB)79Vibration value 3-axis, ah (m/s²)3Brushless motorEnergy sourceBatteryFestool SERVICE all-inclusivMOTEK Fleet ManagementjaNo-load speed (rpm)4500Dust extraction connection Ø (mm)27Weight without battery (kg)3.6Dimensions - LxWxH (mm)321x179x198

Read more less

Cutting length 250 mm - Angle range -45 – +60° AREAS OF USE Click and cut. The HK/HKC machines are very easy to connect to the FSK cutting rails, they are available in three different lengths. With a simple hand movement you have a mobile system for precise angle cuts. FEATURESStop system: The fixed positioning pin and the adjustable stop pin enable precise repetitive angle cuts from -60° to + 60°. The most common angle positions click into place in the rail.Retract function: For permanent operational readiness, the transverse guide rail is equipped with an adjustable stop and an integrated spring that automatically returns the machine to the starting position. Cutting length of 250 mm in 50 mm material thicknessSecure fixation on the workpiece with the clamps that can be easily attached to the cutting rail slotSupplied with screw clamps FSZ 120 SPECIFICATIONSBrand name FESTOOLUsable length (mm)250

Read more less

Fuji 2 Quart HVLP Pressure Pot Assembly Kit Specially designed cup, lid and adapter.No compressor required. Fuji Spray 4-speed or 5-speed turbine mounts 2Qt pressure pot.Ability to spray at any angle, including upside down.Smaller profile for reaching tight corners.Includes: 2Qt. Pressure Pot plus Adapter6 ft. of material fluid hoseQuick CouplerPressure Tube and Check ValveVelcro StrapsNipple CapsNote: You will need both a standard 25 ft. hose plus a whip hose to use your Fuji Spray 2Qt. Pressure Pot. Important: If you are using a Model 9600-G - GXPC spray gun, you will also need a 9060 L fitting.  

Read more less

In stock Our masterpiece. Significantly better. Now twice as fast. As a customer you also get a 10% customer discount and FREE SHIPPING AREAS OF USEPrecise cuts in up to 55 mm material thicknessPerfect cutting of e.g. interior doors - guide rail and circular sawRecessing in worktops CHARACTERISTICS Norway's best-selling plunge saw. The robust TS always convinces with its absolutely precise cuts and the highest capacity. As reliable as usual - but the new thing is that it now goes faster than ever before: The new TS 55 cuts up to twice as fast. In addition, the new generation of saw blades guarantees perfect cutting quality with maximum cutting power. With accessories such as guide rails and angle stops, well-thought-out and proven details, the TS 55 delivers excellent work results and a sawing system in a class of its own - for all board materials Size power and maximum twice as fast compared to the previous generation of TS saws, while the saw blade lasts longerEven when the saw is tilted, the cutting edge always remains unchanged from 90 ° to 47 ° (when using the guide rail)A sawing system in a class of its own thanks to numerous accessoriesRipping knife for safe work and easy installation in an existing saw cutCan be tilted from -1 ° to 47 °Supplied in SYS3 M 337 with HM saw blade 160x1.8x20 WD 42, surface protector, viewing window and operating tool SPECIFICATIONSBrand name FESTOOLMax cutting capacity (mm)55Saw blade diameter (mm)160Saw blade spindle Ø (mm)20Cutting capacity 45° (mm)43Angle range (degrees)1 - 47Power (W)1200Voltage (V)230Sound power level LwA (dB)101Sound pressure level LpA (dB)90Vibration value 3-axial, ah (m/s²)2.5Energy source ElectricNo-load speed (rpm)2000-5800Dust extraction connection Ø (mm) 27Stepless speed controlWeight (kg) 4.3Dimensions - LxWxH (mm) 331x211x208

Read more less