Festool Clamp Festool FS-RAPID/L Areas of applicationFor clamping and positioning Festool guide rails FS - FS/2 and FS/2-KPFor use of the SSU 200 with guide rail.Features Consists of a clamping jaw and a fixed jaw.

Read more less

These filters fit all Fuji Q-Series turbines. They are washable and can be easily replaced. These filters are a friction fit, replacing a filter in seconds. There is no need to take the turbine apart to remove or replace the filter. Always ensure that the filter fills the entire filter housing when fitting. Use something like a screwdriver to lift the filter into place. Size 330 x 52 x 254mm. Key FeaturesFits all Fuji Q-Series turbinesWashable, easy to replace in secondsSize 330 x 52 x 254mm

Read more less

Remote control Festool CT-F I/M-Set Bluetooth remote control Retrofitting kit for CT 26, 36 and 48  AREAS OF USE Module for installation in the free module slot on the vacuum cleaner.Remote control via the remote control (included in the set) or via the cordless machine (in combination with a Bluetooth battery), which allows the vacuum cleaner to start automatically when the cordless machine is started.The remote control also makes it possible to start the vacuum cleaner directly from the suction hose even when the vacuum cleaner is in AUTO mode.FEATURESIncluded in delivery: Remote control CT-F I and receiver module (for CT 26, 36 and 48) SPECIFICATIONSBrand name FESTOOL

Read more less

Fuji Spray 5137 Air Cap Kit Carrying Case Keep your air caps neatly in one place. This air cap kit carrying case can hold 4 sets of needles, nozzles and air caps. The T-Series (Part 5100) and M-Series (Part 7020) will fit in this case. Please note that the GXPC Series (Part 8050) is not compatible with this case.

Read more less

Cutting length 250 mm - Angle range -45 – +60° AREAS OF USE Click and cut. The HK/HKC machines are very easy to connect to the FSK cutting rails, they are available in three different lengths. With a simple hand movement you have a mobile system for precise angle cuts. FEATURESStop system: The fixed positioning pin and the adjustable stop pin enable precise repetitive angle cuts from -60° to + 60°. The most common angle positions click into place in the rail.Retract function: For permanent operational readiness, the transverse guide rail is equipped with an adjustable stop and an integrated spring that automatically returns the machine to the starting position. Cutting length of 250 mm in 50 mm material thicknessSecure fixation on the workpiece with the clamps that can be easily attached to the cutting rail slotSupplied with screw clamps FSZ 120 SPECIFICATIONSBrand name FESTOOLUsable length (mm)250

Read more less

https://youtu.be/jWdcNpL6g_MIncludes 400cc aluminum gravity cup, stainless steel U-tubePressure tube with check valve.Compatible with M-Model spray gunsBrand name: Fuji Spray

Read more less

  Available in 2 kg packages Made from ethylene vinyl acetate (EVA) polymers, GL12 Edgebanding Glue is recommended for use with Co-Matic edgebanders as the preferred hot melt adhesive. It has a working temperature of 160°-190°C. EVA polymer adhesives are solid at room temperature and are activated by heating above their softening point, at which point they are liquid and can therefore be processed. While in their solid state, EVA polymers have high structural integrity. After application of hot melt edgebanding, it can take up to two minutes for the adhesive to cool completely. Upon cooling, the EVA polymers become a solid that neither absorbs water nor is structurally weakened by it. Key Features Waterproof hot melt adhesive, virtually odorlessLow temperature toughness with resistance to stress crackingWorking temperature range of 160° to 190°CInterchangeable with other EVA adhesives

Read more less

Clamping elements Festool MFT AREAS OF USE Used with multifunction table MFT-3  With these, even round and flat workpieces can be clamped to MFT table topsThe clamps can also be used as fixed points.With the clamping arm, you can fix quickly and easily - for safe and precise securing of the workpiece (sawing, grinding, milling and drilling ...)

Read more less

Details Made to order approx. 2 weeks. Fuji 9860 Nylon Gravity Cup Assembly fits Fuji T-75G spray gun. It has a capacity of 600cc. The design of the cap forms an excellent seal without the need for an additional gasket. Key Features Fits Fuji T-75G spray gunCapacity of 600ccThe cap forms an excellent seal without the need for additional gasket

Read more less

Description SET INCLUDES – 50 pcs. reusable paint cups, 50 pcs. liners, 50 pcs. lids and 32 pcs. sealing plugs. The product is available as an alternative for ordering in the online store with a price per 10 pcs. ALTERNATIVE SET INCLUDES – 10 pcs. reusable paint cups, 10 pcs. liners, 10 pcs. lids and 6 pcs. sealing plugs. You also needHard cup large 400 ml. This is not included.MMM26124 High Output [H/O] Hard cup - 850 ml. Large - 3M PPS -  3M PPS 2.0 series MMM26054 S 18 adapter for Fujispray T 70 spray gun PPS 2.0 Adapter No. S2 adapter fits Fujispray T 75 top feed spray gun DISPOSABLE ALL-IN-ONE SPRAY CUP SYSTEM – PPS 2. 0 Spray Cup System Kit gives you everything you need for an all-in-one solution for measuring, mixing, filtering and spraying paint materialsVERSATILE USE – Midi 400 ml. size ideal for any painting project including cars, boats, furniture, appliances, home, arts and craftsWIDE APPLICATION – Used to apply paint, stains, varnishes, primers, undercoats, primers, sealers, clear coats, gelcoats, sprayable adhesives and moreIMPROVED DESIGN – With each cap you get an integrated quarter turn locking collar, which helps eliminate cross-threading and paint build-up, and a built-in fine mesh 200 micron filter, typically used for solvent-based paint coatings.

Read more less

MMM26124 High Output [H/O] Hard Cup 850 ml. Large - 3M PPS - 2.0  Remember adapter for correct spray gun MMM26003 - S2C Adapter for Fujispray turbine-driven T 75 Top-fed spray gun MMM26054 - S 18 adapter for Fujispray turbine-driven T 70 bottom-fed spray gun The 3M PPS™ Series 2.0 H/O Large Pressure Cup 26121 consists of a pressure-set hard cup, collar/cover and hose. The pressure cup is the base for building your own 3M PPS™ system. The 3M PPS™ 2.0 H/O Midi Pressure Cup 26121 requires a suitable adapter to fit your spray gun. Order liners, lids and caps separately. The 3M PPS™ System is a cleaner, faster system, safe from external contamination and offers significant time and solvent savings over gun cleaning. The 3M PPS™ System consists of a reusable plastic cup with disposable liners and caps. With the 3M PPS™ System mounted on your spray gun, you turn on the Fuji turbine, depress the H/O cup and force the liner inside to begin to collapse. This will force the paint or finish in the liner into the spray gun regardless of the orientation of the spray gun. Please note that this is for HVLP spray guns ONLY, NOT for compressor spray guns. The 3M PPS™ 2.0 H/O Large Pressure Cup 26121 requires a suitable adapter to fit your spray gun. Order liners, caps and adapters separately. Key Features3M PPS™ 2.0 (Paint Preparation System), cleaner, faster with less wasteHigh-performance disposable spray cup systemSpray at any angle, save time and solvent on cleanup

Read more less

3M PPS 2.0 series MMM26054 S 18 adapter for Fujispray T 70 turbine-driven bottom-fed spray gun. Specially designed adapters allow the 3M™ PPS™ series 2.0 to be used with almost all types of spray gun models, but this adapter fits the Fujispray T 70 bottom-fed spray gun. Provides improved stability from cup to spray gun. Made of stainless steel for exceptional durability.

Read more less